Current Firmware Version Information

2020 SR/F SR/S Firmware Version  
MBB
17
  • Improvements to extreme low and high temp operation
  • Power tank firmware improvements
  • Streamlined display of notifications and errors on the dash
  • Improved Isolation handling on bikes with the rapid charge module
MBB
16
  • Fixed bug with regen and charge detection in sub freezing temperatures
  • Fixed OTA firmware update issue with the BMS
  • Added SR/F power tank support
MBB
15
  • Improved 12V battery heater behavior at cold temperatures
  • Decreased monolith quiescent current of bike at cold temperatures
  • Improved charging behavior at extremely low voltages
MBB
14
  • Fixed error exiting hibernation state in battery state logic
  • Improved handling of charge latch on European bikes with mennekes port
  • Improvement to CAN message traffic throughput
MBB
13
  • Numerous improvements and bug fixes
  • Over-the-air update completion state machine improvement
  • Trip meter auto resets to 0 when charged to full
  • Allow true 0% regen to be set in custom ride modes
  • Notification improvements
  • Telltale lights illuminate with dash startup
  • Moto dash error notifications clarified and improved
  • Bluetooth connection improvements and bug fixes
  • 12 V battery state management during over-the-air update improvements
  • Support added for firmware updates through the Zero next-generation app if on rev 13 or higher
MBB
11
  • Fixes issue with traction control light behavior
  • Traction control improvements
MBB
10
  • Fixes issue with 6 kW Rapid Charge Module
MBB
9
  • Improves the calculation of torque during a motorcycle stability control event
MBB
8
  • Addresses instances where Check Engine light should illuminate but does not
  • Fixes issue where BMS OTA update may fail the first time and require a repeat
MBB
7
  • Addresses app time sync issue that could freeze dash display
  • Resolves issue with incomplete wakeup from hibernate
  • Improves motor temperature accuracy under certain conditions
  • Resolves issues with display of certain statistics on dash
  • Increased reliability of MBB and dash communication
  • Improved performance of dash status lights
  • Improved charger detection
  • Enhanced log pulling reliability
  • Eliminates false trigger for check engine light while updating
  • Improved over-the-air update functionality
  • Fixed issue with motorcycle overriding rider’s dash time setting
BMS
17
  • Improvements to extreme low and high temp operation
  • Power tank firmware improvements
  • Streamlined display of notifications and errors on the dash
  • Improved Isolation handling on bikes with the rapid charge module
BMS
16
  • Fixed bug with regen and charge detection in sub freezing temperatures
  • Fixed OTA firmware update issue with the BMS
  • Added SR/F power tank support
BMS
15
  • Improved 12V battery heater behavior at cold temperatures
  • Decreased monolith quiescent current of bike at cold temperatures
  • Improved charging behavior at extremely low voltages
BMS
14
  • Fixed error exiting hibernation state in battery state logic
  • Improved handling of charge latch on European bikes with mennekes port
  • Improvement to CAN message traffic throughput
BMS
13
  • Numerous improvements and bug fixes
  • Over-the-air update completion state machine improvement
  • Trip meter auto resets to 0 when charged to full
  • Allow true 0% regen to be set in custom ride modes
  • Notification improvements
  • Telltale lights illuminate with dash startup
  • Moto dash error notifications clarified and improved
  • Bluetooth connection improvements and bug fixes
  • 12 V battery state management during over-the-air update improvements
  • Support added for firmware updates through the Zero next-generation app if on rev 13 or higher
BMS
11
  • Fixes issue with traction control light behavior
  • Traction control improvements
BMS
10
  • Fixes issue with 6 kW Rapid Charge Module
BMS
9
  • Improves the calculation of torque during a motorcycle stability control event
BMS
8
  • Addresses instances where Check Engine light should illuminate but does not
  • Fixes issue where BMS OTA update may fail the first time and require a repeat
BMS
7
  • Addresses app time sync issue that could freeze dash display
  • Resolves issue with incomplete wakeup from hibernate
  • Improves motor temperature accuracy under certain conditions
  • Resolves issues with display of certain statistics on dash
  • Increased reliability of MBB and dash communication
  • Improved performance of dash status lights
  • Improved charger detection
  • Enhanced log pulling reliability
  • Eliminates false trigger for check engine light while updating
  • Improved over-the-air update functionality
  • Fixed issue with motorcycle overriding rider’s dash time setting
2020 Firmware Version  
MBB
30
  • Bug fixes to improve storage longevity in select conditions
MBB
29
  • Support for MY20 Zero DSR Black Forest
  • Charge Tank improvements and bug fixes
BMS
37
  • Bug fixes to improve storage longevity in select conditions
2019 Firmware Version  
MBB
30
  • Bug fixes to improve storage longevity in select conditions
MBB
29
  • Support for MY20 Zero DSR Black Forest
  • Charge Tank improvements and bug fixes
MBB
27
  • Powertank firmware improvements
MBB
26
  • SOC improvements for MY15 power packs that have MY17 BMSs
  • Improvement to charging when power pack temperature reaches 50C
  • Improvement to management of 6 kW charging near freezing temperatures (-2 to 2C)
  • Enables Long Term Storage Mode
  • Improvement of BMS hibernation functionality
  • 6 kW Charge Tank performance improvements
BMS
37
  • Bug fixes to improve storage longevity in select conditions
BMS
35
  • Powertank firmware improvements
BMS
34
  • SOC improvements for MY15 power packs that have MY17 BMSs
  • Improvement to charging when power pack temperature reaches 50C
  • Improvement to management of 6 kW charging near freezing temperatures (-2 to 2C)
  • Enables Long Term Storage Mode
  • Improvement of BMS hibernation functionality
  • 6 kW Charge Tank performance improvements
2018 Firmware Version  
MBB
30
  • Bug fixes to improve storage longevity in select conditions
MBB
29
  • Support for MY20 Zero DSR Black Forest
  • Charge Tank improvements and bug fixes
MBB
27
  • Powertank firmware improvements
MBB
26
  • SOC improvements for MY15 power packs that have MY17 BMSs
  • Improvement to charging when power pack temperature reaches 50C
  • Improvement to management of 6 kW charging near freezing temperatures (-2 to 2C)
  • Enables Long Term Storage Mode
  • Improvement of BMS hibernation functionality
  • 6 kW Charge Tank performance improvements
BMS
37
  • Bug fixes to improve storage longevity in select conditions
BMS
35
  • Powertank firmware improvements
BMS
34
  • SOC improvements for MY15 power packs that have MY17 BMSs
  • Improvement to charging when power pack temperature reaches 50C
  • Improvement to management of 6 kW charging near freezing temperatures (-2 to 2C)
  • Enables Long Term Storage Mode
  • Improvement of BMS hibernation functionality
  • 6 kW Charge Tank performance improvements
Sevcon
0705.0013
2017 Firmware Version  
MBB
30
  • Bug fixes to improve storage longevity in select conditions
MBB
29
  • Support for MY20 Zero DSR Black Forest
  • Charge Tank improvements and bug fixes
MBB
27
  • Powertank firmware improvements
MBB
26
  • SOC improvements for MY15 power packs that have MY17 BMSs
  • Improvement to charging when power pack temperature reaches 50C
  • Improvement to management of 6 kW charging near freezing temperatures (-2 to 2C)
  • Enables Long Term Storage Mode
  • Improvement of BMS hibernation functionality
  • 6 kW Charge Tank performance improvements
BMS
37
  • Bug fixes to improve storage longevity in select conditions
BMS
35
  • Powertank firmware improvements
BMS
34
  • SOC improvements for MY15 power packs that have MY17 BMSs
  • Improvement to charging when power pack temperature reaches 50C
  • Improvement to management of 6 kW charging near freezing temperatures (-2 to 2C)
  • Enables Long Term Storage Mode
  • Improvement of BMS hibernation functionality
  • 6 kW Charge Tank performance improvements
Sevcon
66.23
JIB (2.5 kW Charge Tank only)
4
2016 Firmware Version  
MBB
56
  • Fix for MY15 and MY16 Bluetooth packet handling
MBB
55
  • Powertank firmware improvements
MBB
54
  • Add support for 6 kW Charge Tank
  • Various SOC tracking improvements
  • Add support for MY19 power packs
MBB
53
BMS
48
  • Support for MY20 battery compatibility
BMS
47
  • Powertank firmware improvements
BMS
46
  • Add support for 6 kW Charge Tank
  • Various SOC tracking improvements
  • Add support for MY19 power packs
BMS
43
  • Maintenance release
  • Bug fix improving capacity measurement from Battery Management System
Sevcon
66.23
JIB (2.5 kW Charge Tank only)
4
2015 Firmware Version  
MBB
56
  • Fix for MY15 and MY16 Bluetooth packet handling
MBB
55
  • Powertank firmware improvements
MBB
54
  • Add support for 6 kW Charge Tank
  • Various SOC tracking improvements
  • Add support for MY19 power packs
MBB
53
BMS
48
  • Support for MY20 battery compatibility
BMS
47
  • Powertank firmware improvements
BMS
46
  • Add support for 6 kW Charge Tank
  • Various SOC tracking improvements
  • Add support for MY19 power packs
BMS
43
  • Maintenance release
  • Bug fix improving capacity measurement from Battery Management System
Sevcon
76.06
JIB (2.5 kW Charge Tank only)
4
2014 Firmware Version  
MBB
55
  • Powertank firmware improvements
MBB
54
BMS
60
  • Support for MY20 battery compatibility
BMS
59
  • Powertank firmware improvements
BMS
58
  • Add support for MY19 power packs
BMS
57
  • Maintenance release
  • Bug fix improving capacity measurement from Battery Management System
Sevcon
76.06
CCU (FX only)
4
2013 Firmware Version  
MBB
68
MBB (Monolith Upgrade)
11
  • For bikes with MY14 or newer power packs
  • Security Improvements
  • Maintenance release for revised MBB firmware
BMS
44
Sevcon
76.06
CCU
6
2012 Firmware Version  
MBB
25 (Load-N-Go)
Sevcon
76.06